Top 8 Mfj Antenna Analyzer – Fixed-mount CB Radios
As an Amazon Associate I earn from qualifying purchases.


Step size: user configurable increments of 100Hz, 10KHz, 1KHz, and 100KHz. It can measure feed-point impedance, Estimate quartz crystal parameters. You can selects operation mode, band and extended functions.
High quality-- this antenna analyzer adopts black case would protect the antenna analyzer from external damage, durable in use. Measure and determine optimum settings for tuning stubs: SWR, capacitance, ground loss, impedance resistance + reactance, approximate Q, inductance. Convenient operation-- 5 operation buttons are easy and convenient to operate.





Nanovna-f with 4. 3-inch ips tft lcd and resistive touch screen, polar, voltage standing wave ratio SWR, smith chart, DELAY, which can measure S-parameter, group delay, phase map, LINEAR and so on.
The measurement range of nanovna-f is 50k-1ghz. Upgrade the user program by virtual U disk 16MB SPI flash memory inside. Aluminium housing to protect smahead and reduce the interference of external electromagnetic waves on the instrument. Hkcnma. Com is registered trademark by shenzhen HKCNMA Co. Ltd.
1. Rig Expert
#ad
35MHz, RigExpert AA-35 Zoom HF Antenna Analyzer 60kHz
#adRig Expert #ad - Measurement for 25, 50, 75 and 100-Ohm systems. Connector type: UHF SO-239. Frequency range: 006 to 35 MHz. Dimensions: 103 mm x 207 mm x 37 mm 4. 1 in x 8. 1 in x 1. 4 in. Swr measurement range: 1 to 100 in numerical modes, 1 to 10 in chart modes.More information #ad
Brand | Rig Expert #ad |
Manufacturer | RigExpert #ad |
Height | 8.15 Inches |
Length | 4.06 Inches |
Width | 1.46 Inches |
Part Number | AA35zoom |
Model | AA35zoom |
More information #ad
2. Comet CAA-500 Mark II
#ad
Comet Original CAA-500 MARK II Standing Wave Analyzer 1.8-500MHz SWR & Impedance Simultaneously
#adComet CAA-500 Mark II #ad - The chosen band is swept and the SWR graphed in seconds. Auto band sweep function: switch to the amateur band of choice and press the "Sweep Center" button.More information #ad
Graphic and Analog Antenna Analzer. 8-16vdc external power or 6 aa alkaline batteries up to 10 hours of operation or use Nickel-Metal Hydride NiMH cells. Built-in trickle charger for NiMH batteries, only.Brand | Comet CAA-500 Mark II #ad |
Manufacturer | Comet #ad |
Height | 7.75 Inches |
Length | 3.5 Inches |
Weight | 2.2 Pounds |
Width | 2.65 Inches |
Part Number | CAA-500 MARKII |
Model | CAA-500 MARK II |
More information #ad
3. Wal front
#ad
Antenna Analyzer Meter 1-60MHz Shortwave SWR Antenna Analyzer with 1.0 to 9.99 SWR Usable Measurement Range For Ham Radio
#adWal front #ad - Wide measurement range-- swr usable measurement range of this analyzer is 1. 0 to 9. 99. Feature-- the antenna tester is powered by dc 12 to 14v 500ma external power with 2. 1mm power jackcenter pin positive, just connect the power and then work.Step size: user configurable increments of 100Hz, 10KHz, 1KHz, and 100KHz. It can measure feed-point impedance, Estimate quartz crystal parameters. You can selects operation mode, band and extended functions.
More information #ad
The meter has compact size, easy to carry and store in your bag. Coaxial cable loss, bandwidth, resonant frequency, inductors and capacitors. Application-- measure antenna electrical parameters: swr, determine antenna tuner loss, impedance. High quality-- this antenna analyzer adopts black case would protect the antenna analyzer from external damage, durable in use. Measure and determine optimum settings for tuning stubs: SWR, capacitance, ground loss, impedance resistance + reactance, approximate Q, inductance. Convenient operation-- 5 operation buttons are easy and convenient to operate.
Brand | Wal front #ad |
Manufacturer | Wal front #ad |
Height | 1.57 Inches |
Length | 5.91 Inches |
Weight | 1.21 Pounds |
Width | 3.54 Inches |
Part Number | Wal frontav2nf169gr |
More information #ad
4. Roeam
#ad
1-60MHz HF ANT SWR Standing Wave Tester for Ham Radio Hobbyists Impedance Capacitance Measurement, SARK100(Battery/Power Supply is not Included, Roeam Antenna Analyzer Meter
#adRoeam #ad - Frequency generation & control -- 1-60MHz. Buyers need to install the battery or work with external power supply. Step size -- user configurable increments of 100Hz, 10KHz, 1KHz, and 100KHz. Support measuring data waveform analysis via connecting computer with USB cablenot included.More information #ad
Power supply: 12v 2A Battery: 8 No. Installed black metal Case -- just connect the powernot included and then work. 5 batteries. Note: this product does not include power supply and battery. External power --2. 1mm power jackcenter pin positive. 5 qperation buttons -- easy and convenient to operate.Brand | Roeam #ad |
Manufacturer | Roeam #ad |
Part Number | RTJ2139542793806CH |
More information #ad
5. Rig Expert
#ad
Rig Expert AA-230 Zoom 100kHz-230MHz Antenna Analyzer
#adRig Expert #ad - Cable fault location and Measuring capacitance or inductance of reactive loads. Tuning an antenna to resonance. Making coaxial stubs or measuring their parameters. Comparing characteristics of an antenna before and after specific event rain, hurricane, etc. Rapid check-out of an antenna.More information #ad
Brand | Rig Expert #ad |
Manufacturer | Rig Expert #ad |
Height | 1.3 Inches |
Length | 7.2 Inches |
Width | 3.2 Inches |
Part Number | AA-230 Zoom |
More information #ad
6. Riiai
#ad
Mini60S 1-60MHz HF ANT SWR Antenna Analyzer Meter Tester with Android BT APP PC
#adRiiai #ad - Battery operated for field use or use external 13. 8v wall adapter. Automatic scanning results are displayed as frequencies of lowest SWR and complex impedance.More information #ad
Manual control option displays SWR and complex impedance at selected frequencies. Power saving modes. Multi-point calibration for better accuracy.Brand | Riiai #ad |
Manufacturer | RIIAI #ad |
Height | 1.18 Inches |
Length | 4.72 Inches |
Weight | 0.53 Pounds |
Width | 2.36 Inches |
Part Number | US27LSWU0479 |
Model | US27LSWU0479 |
More information #ad
7. RigExpert
#ad
230MHz, RigExpert Stick 230 Pocket Size Antenna Analyzer for 100kHz
#adRigExpert #ad - Output signal shape: square, 01 to 230 MHz. Connector type: UHF SO-239. Rapid check-out of an antenna in the field or stationary conditions. The analyzer is designed for measuring swr standing wave ratio, return loss, as well as other parameters of cable and antenna systems in the range of 100 kHz to 230 MHz.More information #ad
Measuring capacitance or inductance of reactive loads.Brand | RigExpert #ad |
Manufacturer | RigExpert #ad |
Height | 1.3 Inches |
Length | 7.3 Inches |
Weight | 0.65 Pounds |
Width | 1.6 Inches |
Part Number | STICK-230 |
Model | STICK-230 |
More information #ad
8. HKCNMA.COM
#ad
NanoVNA-F Vector Network Analyzer SWR Meter SmithUpgraded Hardware V3.1,10KHz-1.5GHz 4.3 Inch IPS TFT Shortwave MF HF VHF Portable Handheld Antenna Analyzer
#adHKCNMA.COM #ad - The rf front end is designed with a metal shield that allows the S21 to have a dynamic range better than 60dB over the full frequency range. The lipo charing ic to be changed to IP5306 with 2A high charing current, making the charging time shorter.Nanovna-f with 4. 3-inch ips tft lcd and resistive touch screen, polar, voltage standing wave ratio SWR, smith chart, DELAY, which can measure S-parameter, group delay, phase map, LINEAR and so on.
More information #ad
Upgraded the large capacity 5000mah / 3. 7v lithium battery, and extended usb interface. Use the harmonic of the clock chip si5351 to measure frequency up to 1000MHz. Typically, longer standby time, it can be used as a mobile power source to charge Android or Apple phones when not in use. The measurement range of nanovna-f is 50k-1ghz. Upgrade the user program by virtual U disk 16MB SPI flash memory inside. Aluminium housing to protect smahead and reduce the interference of external electromagnetic waves on the instrument. Hkcnma. Com is registered trademark by shenzhen HKCNMA Co. Ltd.
Brand | HKCNMA.COM #ad |
Manufacturer | Shenzhen HKCNMA Co., Ltd. #ad |
Part Number | NanoVNA28 |
Model | NanoVNA2.8 |
More information #ad