As an Amazon Associate I earn from qualifying purchases.
High compatibilitythe quick release 1/4" screw is suitable for most cameras, projector and telescope, DSLR camera, etc; Your phone can be connected via a extra phone mount as well.
Detachable monopodthis tripod can be quickly disassembled with the central axis screw and transform into a monopod, providing an alternative way of shooting with ease. 360°panorama ball headthe specially designed 28mm ball-head can rotate 360° and get free angles, allowing you to get the perfect shot and amazing panorama every time.

5lb 12kg and withstanding challenging environments. The inverted center column helps take low-angle images with ease. The black exterior with stripe patterns is simplistic and sleek. Adjustable tripod legs the 4-section legs with twist locks can extend from 22.
2-in-1 tripod/monopod featuring a detachable leg and a removable center column, including nature photography, macro photography, Neewer Carbon Fiber Tripod allows transformation from a tripod to a monopod Height can reach 68.9” 175cm for different photographic purposes, and portraits. The 360° panning base enables smooth panoramic photographing while the 360° pivot and 90° tilt movements allow you to take vertical, horizontal, and overhead shots.

You can also add accessories for use with projector or cell phone. Note for long zoom lens cameras over 200MM, it is easier to take panoramic photos. Compatible with arca swiss quick release plate, compatible with DSLR, camcorder, sports camaras, it is recommended to use Manbilly B-20 Ball Head for better balance.
67 inches! It is 17. 1 inches in height and weighs only 2. 75 pounds. Oil-free button the spotting scope tripod leg corner adjustment button uses oil-free design, there are three levels of open angle adjustment. It can also be replaced with a short center column, reaching a minimum height of 7. 8 inches to meet your low-angle photography needs and maintain sufficient stability. Special design center column the special-shaped center column can be quickly mount inverted within 5 seconds.

P>premium construction and strong stability: max. P>upgraded design: the angle of each leg can be adjusted flexibly so that it can be used on uneven ground, rocks, steps, etc. Please note: 1the calibration line must be aligned to be locked or the column can not be stable; 2 Carrying Bag is Included.
P>rotatable transverse center column: the central column can be used vertically at 0 /22. 5 /45 /67. 5 /90 degree or horizontally 360 Degree rotation so that photographers can easier realize panoramic shooting, macro shooting and low angle shooting. P>precise and flexible: the bubble level helps you quickly find the balance of the rack, ensure the accuracy of the shooting, and achieve the perfect position; Equipped with a professional 360-degree metal rotating ball head to provide panoramic shooting. The height of the tripod can be extended to Max.

Strong stability25mm large diameter aluminum alloy tube, the load capacity can reach 22. 04lbs 10kg, provide security and stability support for your dslr Canon Nikon camera.
The bubble level help to judge the level and the accurate composition. Compact & flexible5 sections leg can adjust the height from 22'' to 67''; the N. Note: for camera with telephoto zoom lens, you need to buy a tripod mount ring additionally or telephoto lens bracket for better balance.

With the use of a tripod, it can achieve greater performance and maintain image quality for cropping larger picture sizes. Extends to 66"/168cm tall, folds to 22.

Practical and adjustable: the tripod can be folded to 18. 5inch/47cm compact size and 3. 3 pounds/ 1. 5 kilogram net weight for easy carrying with bag; 3-position leg angle adjustment can help you take photos flexible for different scenarios and photography conditions.
7-81 inches/ 50-206 centimeter. Upgraded design: the unique design of 2 sections center column,which enables the maximum height of the tripod and monopod to be higher,and the inverted centre column can also realize low angles and macro shooting; 4-section legs with quick release twist-locks allow you to adjust the working height from 24. 2-78. 7 inches/ 61.

A stability hook can hang additional weight and the non-slip rubber feet design to increase the stability. Low profile ball headthis low profile ball head adopts superior aluminum-alloy construction, CNC precision finishing, it is very strong and durable.
7" in seconds. High qualitythis carbon fiber tripod uses 10 layers of 100% carbon fiber, main parts all metal made and via CNC Anodic Oxidation technology, 29mm large diameter tube, the load capacity can reach 39lbs 18kg. It is more convenient with the locked method of pull buckle. Lightweight & portabletripod tube made of quality carbon fiber, measures 207" long when folded, super lightweight and compact with loading capacity up to 39lbs / 18kg, weighs only 4.

External center column2-1 tripod monopod design,external center column can increase the height of the tripod, the difference is that it is external, this can reduce the volume of the tripod, you can install it on a tripod when you need it, one leg tube on the tripod can be removed to form a monopod with the center column.
Ideal for travel and work. This carbon fiber tripod can folded to 23 inch, lightweight and highly portable, this tripod will fit into a 26inch, wide suitcase. Compact designthe lightweight design of the external center column allows the tripod to have a compact structure. At the same time, CS80C net weight is only 2. 1kg.

Stable: high-density carbon fiber tube, universal ball head handle with secured clip and quick release leg locking.
You also have our dedicated 24hrs email support team in case you need our help. Compact: the tripod legs can be inverted and folded back 180 degree, giving it a compact size of 14. 5", and it has a portable pocket, easy to carry. Warranty: 12 months worry-free quality assurance.
1. K&F Concept
#ad
K&F Concept 68" Carbon Fiber Camera Tripod,Compact Tripods with Metal Ball Head,Quick Release Plate,Detachable Monopod 10KG Load for DSLR SA255C1 D255C4+BH-28L 2-in-1 Quick Release Plate Kits
#adK&F Concept #ad - Lightweight & portabletripod tube made of quality carbon fiber, weighs only 2. 93lbs, measures 16. 53" long when folded, super lightweight and compact with loading capacity up to 22. 04lbs / 10kg, making it ideal for indoor and outdoor photography.High compatibilitythe quick release 1/4" screw is suitable for most cameras, projector and telescope, DSLR camera, etc; Your phone can be connected via a extra phone mount as well.
More information #ad
Convenient & flexible25mm tube diameter, 5-section legs with spiral type locking knob allows you to adjust the working height from 2047"to 68" in seconds; tripod legs can be adjusted in three levels of opening angle to stabilize on varying grounds and incline levels. Detachable monopodthis tripod can be quickly disassembled with the central axis screw and transform into a monopod, providing an alternative way of shooting with ease. 360°panorama ball headthe specially designed 28mm ball-head can rotate 360° and get free angles, allowing you to get the perfect shot and amazing panorama every time.
Brand | K&F Concept #ad |
Manufacturer | Shenzhen Zhuoer Photograph #ad |
Weight | 2.93 Pounds |
Part Number | Tripod041-47 |
Model | Tripod041-47 |
More information #ad
2. Neewer
#ad
Neewer Carbon Fiber 66 inches/168 centimeters Camera Tripod Monopod with 360 Degree Ball Head,1/4 inch Quick Shoe Plate,Bag for DSLR Camera,Video Camcorder,Load up to 26.5 pounds/12 kilograms
#adNeewer #ad - Foldable & portable the foldable tripod can collapse down to 19. 3” 49cm and slide into the carrying bag for easy storage and transportation. Solid carbon fiber build carbon fiber tripod with 8-layered laminate is strong, and corrosion-resistant, lightweight, capable of holding 26.5lb 12kg and withstanding challenging environments. The inverted center column helps take low-angle images with ease. The black exterior with stripe patterns is simplistic and sleek. Adjustable tripod legs the 4-section legs with twist locks can extend from 22.
More information #ad
6” to 66. 1” 57. 5cm to 168cm in seconds and provide reliable stability. Those legs can stand on uneven surfaces or lay flat for ground-level shootings. Versatile 360° ball head metal ball head comes with a quick release plate for instant camera mounting. 2-in-1 tripod/monopod featuring a detachable leg and a removable center column, including nature photography, macro photography, Neewer Carbon Fiber Tripod allows transformation from a tripod to a monopod Height can reach 68.9” 175cm for different photographic purposes, and portraits. The 360° panning base enables smooth panoramic photographing while the 360° pivot and 90° tilt movements allow you to take vertical, horizontal, and overhead shots.
Brand | Neewer #ad |
Manufacturer | Neewer #ad |
Height | 0.03 Inches |
Length | 0.04 Inches |
Weight | 3.31 Pounds |
Width | 0.05 Inches |
Part Number | [email protected]@##1 |
Model | [email protected]@##1 |
More information #ad
3. Manbily
#ad
Manbily 63" Carbon Fiber DSLR Camera Tripod Monopod Kit,Compact and Lightweight,360-degree Panoramic Ball Head Quick Release Plate,5 Seconds Quickly Invert The Center Column,for Travel WorkYS-254C
#adManbily #ad - Small enough to help you travel conveniently and carry your bag easily. But the maximum load weight can reach 22 lb/10kg. Lightweight and stable are its advantages. Adjustable and extendable each column foot has 3 quick-lock knobs, which can be quickly adjusted to a stable maximum height of 63 inches.You can also add accessories for use with projector or cell phone. Note for long zoom lens cameras over 200MM, it is easier to take panoramic photos. Compatible with arca swiss quick release plate, compatible with DSLR, camcorder, sports camaras, it is recommended to use Manbilly B-20 Ball Head for better balance.
More information #ad
Suitable for travel or outdoor shooting. Compact and lightweight the carbon fiber complete tripod units adopts the latest concealed hexagonal special-shaped center shaft compact design, and the folding width is only 2. 67 inches! It is 17. 1 inches in height and weighs only 2. 75 pounds. Oil-free button the spotting scope tripod leg corner adjustment button uses oil-free design, there are three levels of open angle adjustment. It can also be replaced with a short center column, reaching a minimum height of 7. 8 inches to meet your low-angle photography needs and maintain sufficient stability. Special design center column the special-shaped center column can be quickly mount inverted within 5 seconds.
Brand | Manbily #ad |
Manufacturer | Manbily #ad |
Height | 2.68 Inches |
Length | 21.06 Inches |
Weight | 2.75 Pounds |
Width | 2.68 Inches |
Part Number | YS-254C |
Model | YS-254C |
More information #ad
4. Neewer
#ad
Portable Lightweight, 72.4 inches/184 Centimeters, 360 Degree Ball Head for DSLR Camera Camcorder up to 33 pounds, Neewer Camera Tripod Monopod Carbon Fiber with Rotatable Center Column
#adNeewer #ad - One of the leg can be removed to change into a monopod 52. 5-144. 5cm or walking stick. Comes with a hook which can hang sandbag or other heavy objects to increase the stability; 3/8-inch screw hole under the bubble level allow you to use more photographic equipment such as magic arm, monitor and LED lights.P>premium construction and strong stability: max. P>upgraded design: the angle of each leg can be adjusted flexibly so that it can be used on uneven ground, rocks, steps, etc. Please note: 1the calibration line must be aligned to be locked or the column can not be stable; 2 Carrying Bag is Included.
More information #ad
28mm large diameter carbon fiber tubes with load capacity up to 33 pounds/15 kilograms, and non-slip feet design provide security and stability support for your DSLR cameras; Dense sponge grips on the leg is anti-skid, defensive cold and keep warm. Qr plate with 1/4-inch screw is compatible with Canon Nikon Sony and other cameras camcorders. P>rotatable transverse center column: the central column can be used vertically at 0 /22. 5 /45 /67. 5 /90 degree or horizontally 360 Degree rotation so that photographers can easier realize panoramic shooting, macro shooting and low angle shooting. P>precise and flexible: the bubble level helps you quickly find the balance of the rack, ensure the accuracy of the shooting, and achieve the perfect position; Equipped with a professional 360-degree metal rotating ball head to provide panoramic shooting. The height of the tripod can be extended to Max.
Brand | Neewer #ad |
Manufacturer | Neewer #ad |
Weight | 6.1 Pounds |
Part Number | 10090826 |
Model | 10090826 |
More information #ad
5. K&F Concept
#ad
K&F Concept 67 inch Camera Tripod Horizontal Aluminum Tripods Portable Monopod with 360 Degree Ball Head Quick Release Plate for DSLR Cameras T255A4+BH-28L TM2515T1
#adK&F Concept #ad - Transverse center columncentral column moves from 0 to 180 degrees, can be rotated 360°horizontally, to realize panorama shooting. Detachable monopodit can be turned into a monopod or walking stick alone to make your photography more diverse.Strong stability25mm large diameter aluminum alloy tube, the load capacity can reach 22. 04lbs 10kg, provide security and stability support for your dslr Canon Nikon camera.
More information #ad
Weight with ball head is only 3. 72lbs; can be 180°reflexed, which is super portable with tripod carrying bag. Metal ball headcan be rotated 360 degrees, helping to expand camera activity range when panoramic shooting. The bubble level help to judge the level and the accurate composition. Compact & flexible5 sections leg can adjust the height from 22'' to 67''; the N. Note: for camera with telephoto zoom lens, you need to buy a tripod mount ring additionally or telephoto lens bracket for better balance.
Brand | K&F Concept #ad |
Manufacturer | Shenzhen Zhuoer Photograph #ad |
Weight | 3.64 Pounds |
Part Number | KF09.046 |
Model | KF09.046 |
More information #ad
6. Neewer
#ad
Neewer 66 inches/168 centimeters Carbon Fiber Camera Tripod Monopod with 360 Degree Ball Head, 1/4 inch Quick Shoe Plate and Bag for DSLR Camera Video Camcorder Travel and Work,Load up to 33lbs/15kg
#adNeewer #ad - Center column design with hook attached to sand bag increasing stability, with non-slip feet design to keep the tripod steady. Max load weight is 33lbs/15kg for optimal performance.With the use of a tripod, it can achieve greater performance and maintain image quality for cropping larger picture sizes. Extends to 66"/168cm tall, folds to 22.
More information #ad
8"/58cm. Four sections Carbon Fibre adjustable-height leg tubes. 360 degree dial of swivel ball head with bubble level provide you with a panoramic view. Three position leg angle adjustment system provides flexible shooting. 2-in-1 tripod, removed one leg can be used as monopod and converted into alpenstock.Brand | Neewer #ad |
Manufacturer | Neewer #ad |
Height | 5.2 Inches |
Length | 19.4 Inches |
Weight | 4.9 Pounds |
Width | 5.3 Inches |
Part Number | 10087210 |
Model | 10087210 |
More information #ad
7. Neewer
#ad
360 Degree Ball Head, Neewer 79 Inches Carbon Fiber Camera Tripod Monopod with 2 Center Axis, 1/4 inch Quick Shoe Plate and Bag for DSLR Camera Video Camcorder Travel and Work,Load up to 26.5 pounds
#adNeewer #ad - It has 2 independent control knobs to facilitate the adjustment of each precise angle. Load weight is 26. 5 pounds/ 12 kilogram for optimal performance; The bubble level indicator on ball head help to achieve accurate horizontal alignment and provide photographic stability. Ultra-stable: made of finely crafted carbon fiber; max.Practical and adjustable: the tripod can be folded to 18. 5inch/47cm compact size and 3. 3 pounds/ 1. 5 kilogram net weight for easy carrying with bag; 3-position leg angle adjustment can help you take photos flexible for different scenarios and photography conditions.
More information #ad
360 degrees panorama ball head: the specially designed 36mm metal ball head can rotate 360 degrees which will allow you to get the perfect shooting angle to create panoramic photography. Transform into monopod: one of the tripod leg tube can be quickly disassembled and connect with the central column to transform into a monopod, providing an alternative way of shooting; The height of the monopod is adjustable from 19. 7-81 inches/ 50-206 centimeter. Upgraded design: the unique design of 2 sections center column,which enables the maximum height of the tripod and monopod to be higher,and the inverted centre column can also realize low angles and macro shooting; 4-section legs with quick release twist-locks allow you to adjust the working height from 24. 2-78. 7 inches/ 61.
Brand | Neewer #ad |
Manufacturer | NEEWER #ad |
Height | 3.94 Inches |
Length | 17.72 Inches |
Weight | 3.88 Pounds |
Width | 3.94 Inches |
Part Number | 10097057 |
Model | 10097057 |
More information #ad
8. ARTCISE
#ad
Max Load 39lbs/18kg, 69.7" Carbon Fiber Camera Tripod with Low Profile Ball Head ARTCISE Professional Lightweight Compact Tripod with Two 1/4 inch Quick Shoe Plate for DSLR Camera,Video Camcorder
#adARTCISE #ad - And the central pole can be inverted to allow for low angle shooting and macro photography. 2 in 1 tripod monopodthis tripod can be quickly disassembled with the central axis screw and transformed into a monopod 21. 7” to 73. 2”. 3-position leg angle adjustment system helps you take photos flexible for different scenarios and photography conditions.A stability hook can hang additional weight and the non-slip rubber feet design to increase the stability. Low profile ball headthis low profile ball head adopts superior aluminum-alloy construction, CNC precision finishing, it is very strong and durable.
More information #ad
Compared with traditional ball head, anodized surface, low-profile ball head design create stronger locking force and higher stability. Extend easilytripod tube with quick release twist locks allow you to adjust the tripod height for 24" up to 69. 7" in seconds. High qualitythis carbon fiber tripod uses 10 layers of 100% carbon fiber, main parts all metal made and via CNC Anodic Oxidation technology, 29mm large diameter tube, the load capacity can reach 39lbs 18kg. It is more convenient with the locked method of pull buckle. Lightweight & portabletripod tube made of quality carbon fiber, measures 207" long when folded, super lightweight and compact with loading capacity up to 39lbs / 18kg, weighs only 4.
Brand | ARTCISE #ad |
Manufacturer | ARTCISE #ad |
Height | 5.12 Inches |
Length | 19.69 Inches |
Weight | 4.16 Pounds |
Width | 5.12 Inches |
Part Number | AS70 |
Model | AS70C |
More information #ad
9. ARTCISE
#ad
Carbon Fiber Tripod ARTCISE 81'' Heavy Duty Travel Tripod for Camera, DSLR SLR Digital Camcorder, 10-Layer Carbon Fibre Tube,32.5mm Leg with Ultra-Stable Tripod Ball Head for Canon Nikon Sony
#adARTCISE #ad - Gravity hook can hang backpack, tripod bag and other items. If you have any questions you can contact us at any time. The leg tube is composed of 10 layers of carbon fiber, the carbon fiber material reduced the tripod weight, which has a very strong load-bearing capacity.External center column2-1 tripod monopod design,external center column can increase the height of the tripod, the difference is that it is external, this can reduce the volume of the tripod, you can install it on a tripod when you need it, one leg tube on the tripod can be removed to form a monopod with the center column.
More information #ad
Humanized designthe tripod legs are covered with high quality natural rubber grip, allowing users to protect the user's hands when grabbing in cold environments. Double panoramic ball headequipped with high-quality artcise ub40 ball head, made of high-quality aluminum alloy material, 40mm ball diameter, panoramic design is easier to take panoramic pictures, CNC machining, low center of gravity design, solid and stable. Ideal for travel and work. This carbon fiber tripod can folded to 23 inch, lightweight and highly portable, this tripod will fit into a 26inch, wide suitcase. Compact designthe lightweight design of the external center column allows the tripod to have a compact structure. At the same time, CS80C net weight is only 2. 1kg.
Brand | ARTCISE #ad |
Manufacturer | ARTCISE #ad |
Height | 22 Inches |
Length | 3 Inches |
Weight | 5 Pounds |
Width | 3 Inches |
Part Number | CS80C |
Model | ARTCISE CS80C+UB40 |
Warranty | 8-Years Warranty |
More information #ad
10. YESSBON
#ad
Cameras and DSLR, Kodak, Olympus, Panasonic, Fuji, Nikon, YESSBON ZOMEI Carbon Fiber Q666C Tripod Heavy Duty Lightweight Travel with 360 Degree Ball Head Compact for Canon Sony, Samsung
#adYESSBON #ad - We're confident you will like this, if not you have 45 days to change your mind. Design: 5-section center column, realizing your lowest angle shooting. The leg height can be individually adjusted as needed or all three legs can be raised to the full height of 61 inches.Stable: high-density carbon fiber tube, universal ball head handle with secured clip and quick release leg locking.
More information #ad
Dual use: 2-in-1 tripod, the tripod could be converted into a full size monopod by screwing together the removeable center column and tripod leg to work as a monopod or trekking poles. It comes with a padded carrying case with shoulder strap which is convenient for travel and good for protection. You also have our dedicated 24hrs email support team in case you need our help. Compact: the tripod legs can be inverted and folded back 180 degree, giving it a compact size of 14. 5", and it has a portable pocket, easy to carry. Warranty: 12 months worry-free quality assurance.
Brand | YESSBON #ad |
Manufacturer | YESSBON #ad |
Weight | 3.1 Pounds |
Part Number | Q666C |
Model | 4332015970 |
More information #ad