Top 10 Dayton Audio Subwoofer – Home Audio Subwoofers

As an Amazon Associate I earn from qualifying purchases.

1. Polk Audio


Polk Audio PSW10 10" Powered Subwoofer, Power Port Technology | Up to 100 Watts | Big Bass in Compact Design | Easy Setup with Home Theater Systems

Polk Audio #ad - A perfect solution for your small-to-mid size room. Easy to integrate with existing systems – hook up this sub to the receiver and upgrade your music sound instantly! Features continuously variable 80-160 Hz crossover and 40-160 Hz -3dB frequency response.

Blends easily with any speaker and plays the most demanding nodes effortlessly without any distortion. A sleek detachable grille on the front, speaker and line-level inputs as well as speaker-level outputs on the back, and a Phase Toggle Switch for multiple subwoofers, make this sub cohesive and complete!. Powered subwoofer for extra bass & punch – a 10-inch dynamic balance woofer & a uniquely configured directed port provides accurate bass with added depth that brings your music and movies alive.

Louder clearer sound even at high volume – enjoy a thrilling yet balanced music experience with rich, deep sound, even at low frequencies. Double the amplifier power to 100 watts of dynamic power with its in-built 50-watt rms amp. Sophisticated engineering with best in class resonance-free driver materials make this sub highly durable and FIT FOR EXTENDED USE.
BrandPolk Audio #ad
ManufacturerPolk Audio #ad
Height14.4 Inches
Length16.2 Inches
Weight26 Pounds
Width14 Inches
Part NumberAM1055-C
Warranty5 years, 3 years on amplifier, parts & labor

2. Dayton Audio


Dayton Audio SUB-1500 15" 150 Watt Powered Subwoofer

Dayton Audio #ad - Downward-firing flared port design for clean, powerful bass. Enormous 15" heavy-duty, long-throw woofer. Unobtrusive texture black vinyl finish cabinet with removable grill. 150w amplifier with selectable auto-on feature for satisfying power. Perfect for large home theater rooms.
BrandDayton Audio #ad
ManufacturerDayton Audio #ad
Height21.6 Inches
Length21.6 Inches
Weight60 Pounds
Width20.7 Inches
Part NumberSUB-1500

3. Dayton Audio


Dayton Audio DCS165-4 6-1/2" Classic Subwoofer 4 Ohm

Dayton Audio #ad - Vented pole piece and bumped back plate provide plenty of VC travel with minimal compression. Copper pole piece cap minimizes inductance. 4-layer vc with polyimide former allows high power handling. Great for home and automotive applications. Rigid non-pressed treated paper/Kevlar cone with rubber surround.
BrandDayton Audio #ad
ManufacturerDayton Audio #ad
Weight4.85 Pounds
Part NumberDCS165-4

4. Dayton Audio


Dayton Audio UM10-22 10" Ultimax DVC Subwoofer 2 ohms Per Coil

Dayton Audio #ad - 500 watts rMS power handling. Large vented pole piece and under-spider venting. Dual 2 ohm, 2-layer copper voice coils. Black anodized aluminum former and black pole improves heat dissipation. Thick, one-piece Nomex honeycomb covered cone with woven heavy-duty glass-fiber.
BrandDayton Audio #ad
ManufacturerDayton Audio #ad
Height5.7 Inches
Length10.77 Inches
Weight22.35 Pounds
Width5.7 Inches
Part NumberUM10-22

5. Dayton Audio


Dayton Audio SUB-1000L 10" 100 Watt Low-Profile Powered Subwoofer

Dayton Audio #ad - Included floor stands and on-wall mounting brackets facilitate a variety of mounting schemes. Full-sized 10" woofer and powerful 100 watt amplifier produce big bass output. Clever bass-reflex design for muscular bass from an enclosure that's a mere 6" thick. Unobtrusive, textured black vinyl finish complements any decor. Ultra-slim subwoofer cabinet installs anywhere. Down-firing, side-firing, whatever you need.
BrandDayton Audio #ad
ManufacturerDayton Audio #ad
Height9 Inches
Length27 Inches
Weight25.66 Pounds
Width17.1 Inches
Part NumberSUB-1000L

6. Monoprice


8 Inch With Auto-On Function, For Studio And Home Theater, Monoprice 60-Watt Powered Subwoofer

Monoprice #ad - The subwoofer will then combine the signals to process the mono bass signal it needs to drive the speaker. Additionally, without a special subwoofer output, the subwoofer has a set of right/left line level inputs. For each input there is a corresponding output. If you are using an amplifier with a single mono subwoofer line level output, simply use an RCA "Y" cable to split the output and send it to the two line level inputs on the subwoofer.

If using a standard stereo system, you can connect these to the left and right line level outputs on the amp. The subwoofer provides its own power and includes impedance matching circuitry, so this will not reduce the power output to the front speakers or affect the overall impedance load on the amplifier. Gain and frequency knobs on the control panel allow you to adjust the crossover filter and the power output for the optimum blend and balance of bass output with your stereo or surround speakers.

The subwoofer has a frequency response range of 50 to 250 Hz with a lowpass crossover filter, which can be adjusted from 50 to 150 Hz. The subwoofer has multiple input options, which allow it to be used with any existing stereo or 5. 1 or greater amplifier system. High-level inputs accept a full-range signal from the amplifier's stereo speaker outputs. The subwoofer is housed in an attractive black wood cabinet that measures 13.
BrandMonoprice #ad
ManufacturerMonoprice Inc. #ad
Height15.4 Inches
Length14.8 Inches
Weight3 Pounds
Width16.1 Inches
Part Number108248

7. BIC


BIC America F12 12-Inch 475-Watt Front Firing Powered Subwoofer

BIC #ad - Inputs for both dolby Pro Logic and Dolby Digital/DTS. Patented bic "Venturi" vent eliminates port noise. Backed by 5-year warranty. Adjustable crossover, adjustable volume control, automatic signal sensing. Powered subwoofer with 12-inch injection molded long throw woofer; BASH designed amp.
BrandBIC #ad
ManufacturerBIC America #ad
Height17 Inches
Length17 Inches
Weight41.25 Pounds
Width14.8 Inches
Part NumberF12

8. Dayton Audio


Dayton Audio SA230 230W Subwoofer Amplifier

Dayton Audio #ad - Low-level, high-level, and LFE inputs. Heavy-duty steel chassis with black brushed aluminum faceplate. 18 db/octave low pass filter. Mono class ab output stage for solid, well defined output. Manual, auto, or triggered on/off modes for integration into any automated system.
BrandDayton Audio #ad
ManufacturerDayton Audio #ad
Height3.75 Inches
Length13.88 Inches
Weight18.96 Pounds
Width17.25 Inches
Part NumberSA230
Warranty1 Year

9. Dayton Audio


Dayton Audio SPA250 250 Watt Subwoofer Plate Amplifier

Dayton Audio #ad - Variable gain, crossover point and switchable phase controls optimize room integration. Switchable 6 db @ 35 hz bass boost measured power output: 156 watts rms into 8 ohms @ 01% thd, 252 watts rms into 4 ohms @ < 1. 0% thd. Low-level, high-level, and LFE inputs connect to any system. Manual, auto, or triggered on/off modes for compatibility with any automated system. Mono class ab output stage for solid, well defined output.
BrandDayton Audio #ad
ManufacturerDayton Audio #ad
Height9.84 Inches
Length5.12 Inches
Width9.84 Inches
Part Number300-803

10. Dayton Audio


Dayton Audio SA1000 Subwoofer Amplifier Rack Mountable

Dayton Audio #ad - Manual, auto, or triggered on/off for integration into any automated system. Class-ab output stage for clean, controlled amplification. Low frequency parametric EQ allows you to boost or cut to custom-tailor the sound. Sophisticated soft clip circuitry improves headroom and protects woofers. Patented tracking down-converter power supply for high efficiency.
BrandDayton Audio #ad
ManufacturerDayton Audio #ad
Height16.2 Inches
Length19.35 Inches
Weight30.8 Pounds
Width7.2 Inches
Part NumberSA1000