As an Amazon Associate I earn from qualifying purchases.
MakerFocus #ad - I2c controlled, 12-bit resolution for each channel 4096 scales; integrates 5V regulator, using only 2 pins; Up to 16-Channel servo/PWM outputs, up to 3A output current, can be powered from battery through VIN terminal.
Servo motor driver: you may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo.
Note: 1. If you only connect 5v power supply to usb interface, servo cannot be driven; 2. You should connect higher power supply for higher-power servo; 3. Make sure servo are connected properly, otherwise they will not move. User manual: please get the link from the operation guide below. Note: the raspberry pi and servo in the photo are not included.
Ximimark #ad - Including 2 SG90 servos. About us, welcome to our store for more choices with best price. Anti-vibration Camera Mount for Aircraft FPV.
For any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. We will reply you about any question you ask within 24 hours. They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion.
Arducam #ad - Integral IR filter. Software auto focus lens: B07SN8GYGD. Still picture resolution: 2592 x 1944. 5mpixel sensor with omnivision ov5647 sensor in a fixed-focus lens. Max video resolution: 1080p. High-definition video camera for raspberry pi Model A or B, model 2, 3 B+, Raspberry Pi 3, B+, Pi 4.
MakerFocus #ad - 5 megapixels ov5647 sensor, support 1080p resolution; 2. 0 aperture F, 1. 7 mm focal length. Suitabl for Surveillance Camera. You can use it to take a wide angle picture or video by this camera. This is a fisheye wide angle 175 degrees ir camera for raspberry Pi 4B/3B+/3B/2B. We have a strong after-sales service team: as long as you have any questions about the product, we will resolve your issue immediately if received your email, your satisfactory purchase experience is our greatest hope! How to email us? Plz click “MakerFocus” and click “Ask a question” to email us! Looking for your consultation! The advantage is that during the day, the photographs taken will not be reddish, built in IR-CUT, which also eliminates the need for manual switching.
The camera is equipped with photosensitive resistance, which enables the camera to automatically detect and recognize light to automatically switch between the night-vision and day-time shooting mode. Manual settings are not required, plug-in then it can be used. Please note: the led fill lights on both sides will warm upgenerally in 40 to 50℃ when they working, but it is normal, please don't worry, they can keep working 20 hours, it will not damage the camera normally. Instructions video and Instruction manual: Please get the link from the product description below.
Arducam #ad - Search asin b088bgn5hc b088cqw11p to get the tripod and camera cable for Raspberry Pi High Quality Camera. Other specs – 1″ lens optical format, dimension: Φ39×50mm, F1.
4-f16, weight: 133. 7g. No lens shading, decent image quality, no dark corners, it just works. Field of view fov: 44. 6°h×33. 6°v, 24°h on 1/2. 3" imx477 high Quality Camera.
HiLetgo #ad - Speed down stepping motor. Hiletgo stepper Motor+ Driver Board. Voltage: 5V. Diameter: 28mm. Stepping angle: 5. 625 x 1/64.
Bicool #ad - It could be an ideal alternative for the Raspberry Pi Camera Module V2. Higher resolution & sensitivity camera module-compared to 8mp of normal raspberry Camera, Along With Nearly 50% Greater Area Per Pixel, The High Quality Camera Offers Up To 12.
3mp, delivering Better Imaging Effect. It adopts the imx477r sensor, and requires a C- or CS-mount lens to work.
Weewooday #ad - Wide compatibility: our camera sensor modules are compatible with raspberry pi model A or B, raspberry pi 3, 3 B+, model 2, B+, pi 4. Enough quantity: you will receive 4 pieces of 5 megapixels 1080p sensor OV5647 mini camera and 2 pieces of 6 inches 15 pin ribbon cable, each one can serve you for a long time, and enough for daily using and replacing.
Still picture resolution: 2592 x 1944, its max video resolution is 1080p, clear enough for you to use, so it is a practical part for you to take some exquisite photos for your family.
Weewooday #ad - Compatibility: these infrared night vision camera modules are compatible with Raspberry Pi 4/ 3/ 2/ 1 model B/ B +/ a + except Pi Zero/ Zero W. Infrared fill light: equipped with 2 infrared fill lights, so the camera module allows you to take pictures at night and you don't have to worry about the light; The brightness of infrared light will adjust automatically based on the darkness of the circumstances.
Ir-cut camera: the camera module has day mode and night mode, it can switch automatically between the 2 modes according to the change of light, which helps you to avoide image deviation and get clearer images during the day and night.
Nice performance: the ir-cut video camera not only supports shooting 2592 x 1944 pixel static image but also supports recording [email protected], [email protected] and 640 x 480p 60/90 video; Featuring with 1080P 5MP OV5647 webcam sensor, 5 megapixels and adjustable focal length.
waveshare #ad - I2c interface, only 2 pins are required for moving and light intensity sensing Onboard PCA9685 chip, provides 12-bit resolution PWM signal for moving control.
Comes with development resources and manual demo code, assembly guide. Onboard voltage level translator, compatible with 3. 3v/5v operating voltage specific acrylic board to fix the Raspberry Pi camera, make it easy to install.
1. MakerFocus
#adMakerFocus PWM Servo Motor Driver IIC Module 16 Channel PWM Outputs 12 Bit Resolution I2C Compatible with Raspberry Pi 4 3B+ 3B Zero/Zero W/Zero WH and Jetson Nano
#adServo motor driver: you may have tried to control a robotic arm or a hexapod walker by using the Raspberry Pi, but finally get frustrated due to the limited number of PWM outputs and the jittering servo.
More information #ad
Raspberry pi connectivity, compatible with raspberry Pi 4 3B+ 3B 2B+ 2B Zero/Zero W/Zero WH and Jetson Nano. Now you get a new option to bring your ideas to life, we prepare this useful Servo Driver Board for you. Note: 1. If you only connect 5v power supply to usb interface, servo cannot be driven; 2. You should connect higher power supply for higher-power servo; 3. Make sure servo are connected properly, otherwise they will not move. User manual: please get the link from the operation guide below. Note: the raspberry pi and servo in the photo are not included.
| Brand | MakerFocus #ad |
| Manufacturer | MakerFocus #ad |
| Height | 0.39 Inches |
| Length | 2.56 Inches |
| Weight | 0.04 Pounds |
| Width | 1.18 Inches |
| Part Number | E73431418IB |
More information #ad
2. Ximimark
#adMini Pan/Tilt Camera Platform Anti-Vibration Camera Mount w/ 2 Servos Aircraft FPV
#adFor any reason you are unsatisfied with our product at any time, simply contact support for exchange or refund. We will reply you about any question you ask within 24 hours. They're good for beginners who want to make stuff move and the pan-tilt is an easy way to give whatever you're making both left-right and up-down motion.
More information #ad
Camera is not included. This is a small camera Platform. What we pursue is your satisfaction of our service, Professional factory, not just for our goods.| Brand | Ximimark #ad |
| Manufacturer | Ximimark #ad |
| Weight | 0.11 Pounds |
| Part Number | 43218-273 |
More information #ad
3. Arducam
#ad1080P HD OV5647 Camera Module V1 for Pi 4, Raspberry Pi 3, and Other A/B Series, 3B+, Arducam 5MP Camera for Raspberry Pi
#adMore information #ad
| Brand | Arducam #ad |
| Manufacturer | Arducam #ad |
| Height | 0.1 Inches |
| Length | 4.7 Inches |
| Weight | 0.02 Pounds |
| Width | 0.2 Inches |
| Part Number | UCT_B0033 |
| Model | B0033 |
More information #ad
4. MakerFocus
#adRaspberry Pi4 Camera Night Vision Fisheye Camera 5mp OV5647 IR-CUT Automatically Switching between Day-Vision and Night-Vision Compatible with Raspberry Pi3B+/3B/2B, MakerFocus Raspberry Pi4 Camera IR
#adMore information #ad
You can adjust the micro adjustable resistorbeside the lights to turned down the lights to Lower temperatures. The camera is equipped with photosensitive resistance, which enables the camera to automatically detect and recognize light to automatically switch between the night-vision and day-time shooting mode. Manual settings are not required, plug-in then it can be used. Please note: the led fill lights on both sides will warm upgenerally in 40 to 50℃ when they working, but it is normal, please don't worry, they can keep working 20 hours, it will not damage the camera normally. Instructions video and Instruction manual: Please get the link from the product description below.
| Brand | MakerFocus #ad |
| Manufacturer | MakerFocus #ad |
| Height | 2.76 Inches |
| Length | 0.79 Inches |
| Weight | 0.06 Pounds |
| Width | 3.94 Inches |
| Part Number | 9PX40532F181E2OI5AOMW8 |
More information #ad
5. Arducam
#ad16mm Focal Length with C-CS Adapter，Manual Focus and Aperture Adjustment, Arducam C-Mount Lens for 12MP IMX477 Raspberry Pi HQ Camera
#ad4-f16, weight: 133. 7g. No lens shading, decent image quality, no dark corners, it just works. Field of view fov: 44. 6°h×33. 6°v, 24°h on 1/2. 3" imx477 high Quality Camera.
More information #ad
The wise alternative - a cost-effective choice that adds up to your Raspberry Pi High Quality Camera Module, with 16mm focal length, manual focus and adjustable aperture. Please note this lens does not come with an IR filter. It just works - we’ve tested this lens among the many other selected on the 12MP RPi HQ Camera.| Brand | Arducam #ad |
| Manufacturer | Arducam #ad |
| Part Number | LN046 |
More information #ad
6. HiLetgo
#adHiLetgo 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board for Arduino PI PIC Raspberry Pi
#adMore information #ad
| Brand | HiLetgo #ad |
| Manufacturer | HiLetgo #ad |
| Part Number | 3-01-0153 |
| Model | 3-01-0153 |
More information #ad
7. Bicool
#adAlternative for Raspberry Pi Camera Module V2, Raspberry Pi HQ Camera Module for Raspberry Pi 4B/3B+/3B/2B/A+/Zero/W/Zero WH,12.3MP IMX477 Sensor Supports C- and CS-Mount Lenses, High Sensitivity
#ad3mp, delivering Better Imaging Effect. It adopts the imx477r sensor, and requires a C- or CS-mount lens to work.
More information #ad
It suits industrial and consumer applications like security camera, and other specialist optical devices which require higher level of visual fidelity. This raspberry pi high quality camera is the latest camera board from raspberry Pi Foundation. It is compatible with all raspberry pi series boards Raspberry Pi 4B/3B+/3B/2B/A+/Zero/Zero W/Zero WH, etc.| Brand | Bicool #ad |
| Manufacturer | Bicool #ad |
| Part Number | Raspberry Pi HQ Camera |
| Model | Raspberry Pi HQ Camera |
More information #ad
8. Weewooday
#ad4 Pieces 5 Megapixels 1080p Sensor OV5647 Mini Camera Module with 6 Inch 15 Pin Ribbon Cable Compatible with Raspberry Pi Model A B B+, Pi 4, 3 B+, Pi 2 and Raspberry Pi 3
#adStill picture resolution: 2592 x 1944, its max video resolution is 1080p, clear enough for you to use, so it is a practical part for you to take some exquisite photos for your family.
More information #ad
Csi interface: this interface uses the dedicated CSI interface, via the CSI bus, a higher bandwidth ink which carries pixel data from the camera back to the processor. Focus lens: our 5 megapixels ov5647 sensor has equipped with fixed focus lens, which can help you to grasp clear and beautiful pictures, keeping unforgettable memory.| Brand | Weewooday #ad |
| Manufacturer | Weewooday #ad |
| Part Number | Weewooday-2358 |
More information #ad
9. Weewooday
#ad2 Sets for Raspberry PI Camera 1080P Webcam 5MP OV5647 Sensor Day and Night Vision IR-Cut Video Camera Focus Adjustment for Raspberry Pi RPi 4 3 B B+ 2B 3A+ 2 1 Camera
#adIr-cut camera: the camera module has day mode and night mode, it can switch automatically between the 2 modes according to the change of light, which helps you to avoide image deviation and get clearer images during the day and night.
More information #ad
Cmos sensor interface: the camera module adopts appropriative CMOS sensor interface CSI, via the CSI bus; A higher bandwidth link that transmits 5 megapixels data from the camera back to the processor. Nice performance: the ir-cut video camera not only supports shooting 2592 x 1944 pixel static image but also supports recording [email protected], [email protected] and 640 x 480p 60/90 video; Featuring with 1080P 5MP OV5647 webcam sensor, 5 megapixels and adjustable focal length.
| Brand | Weewooday #ad |
| Manufacturer | Weewooday #ad |
| Part Number | Weewooday-11844 |
More information #ad
10. waveshare
#adWaveshare 2-DOF Pan-Tilt HAT for Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+ Light Intensity Sensing Control Camera Movement I2C Interface
#adComes with development resources and manual demo code, assembly guide. Onboard voltage level translator, compatible with 3. 3v/5v operating voltage specific acrylic board to fix the Raspberry Pi camera, make it easy to install.
More information #ad
Onboard tsl2581fn light-to-digital converter, with embedded ADC, provides a value that approximates the human eye response to assist the module. Raspberry pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+.| Brand | waveshare #ad |
| Manufacturer | Waveshare #ad |
| Weight | 0.25 Pounds |
| Part Number | Pan-Tilt HAT |
| Model | Pan-Tilt HAT |
More information #ad
