As an Amazon Associate I earn from qualifying purchases.
1. Hustler #ad
Hustler VP-1 Tri-Band Resonator Adapter for HF Mobile Antennas, fits Hustler 3/8 x 24 Stud Masts #adHustler #ad
- Automatic band switching using any three Hustler HF mobile resonators. For use with model mo-1, mo-3, MO-2, and MO-4. Adapts any hustler HF mast to tri-band operation easily and quickly.
2. Hustler #ad
Hustler 20 Meter Mobile Antenna Resonator RM20 400W Power for MO1 MO2 MO3 MO4 #adHustler #ad
- Bandwidth 2:1: 80-100 KHz. Resonator Band: 20 Meters. Height: 30-5/8 Inches. Power rating: 400 Watts PEP.
3. Hustler #ad
Designed for Hustler HF Resonators, MO-4 HF Mobile Antenna Mast for Deck or Roof Mount #adHustler #ad
- The performance of the mO-4 is slightly less than that of our full size 54" mast. The mo-4 is designed for use with Hustler mobile H. F. Resonators. The mo-4 is constructed of a solid stainless steel rod with 3. 8-24 fitting on both ends.
4. Hustler #ad
Hustler HF MultiBand Vertical Amateur Ham Radio Base Antenna 5BTV #adHustler #ad
- Designed to be ground or roof mounted! AM - SSB - FM - CW! Hf ham radio vertical mutiband high performance base antenna! Covers 10-80m bands 10, 15, 20, 40, 75/80 meters ! For Transmitting and Receiving!.
Approx 25ft tall aluiminum with coils, handels up to 1500W PEP! Attaches to most standard optional Mast Pipes, & Requires Optional length of 50 ohm Coax Cable.
5. HYS #ad
HYS Amateur Antennas Dual-Band NMO 20 Inch Antenna VHF 144/UHF 430MHz NMO L Shape Mount Mobile Antenna Bracket W/13 ft RG58 Coax Cable NMO to UHF-male/PL259 for Motorola Kenwood Midland Mobile Radios #adHYS #ad
- Maximum power input-watts:100W; Antenna length :20inch; The flexible whip is stainless steel;. Nmo to pl259 working for so239/uhf female Dual Band Radio.
144/430mhz nmo antenna work for motorola kenwood icom vertex blackbox HYT Hytera Mobile Radios. Stainless steel l-bracket for Trunk Groove Or Side Mounting. The mount is a "trunk lid" mount with 13'/about 4m rg-58u cable. Centre frequency: 144/430;vswr:< 1.
5; gain: 144mhz 3. 0dbi, 430mHz5. 0dbi;. This requires a small typically 3/8" to 3/4" hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation. L-bracket hole stainless steel 3/4" nmo hole mount, l bracket for hys tcj-n1 coax NMO Mount Cable Mobile Antennas Car Truck Hood install.
6. HYS #ad
HYS TCJ-N1 Dual Band NMO 144Mhz/430Mhz Mobile FM Transceiver 2M/70cm Antenna with 13 ft RG58 Coax Cable NMO to UHF PL259 Connector for Yaesu Kenwood HYT Vertex Icom Mobile Radios #adHYS #ad
- 144/430mhz nmo antenna work for motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios. Maximum power input-watts:100w; Antenna length :20"; The flexible whip is stainless steel;. Centre frequency: 144/430;vswr:< 1.
5; gain: 144mhz 3. 0dbi, 430mHz5. 0dbi;. This requires a small typically 3/8" to 3/4" hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation. The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable.
7. LUITON #ad
CB Antenna 14 Inch for Handheld CB Radio 27 Mhz Antenna Full Kit with Heavy Duty Magnet Small Mount PL-259 Connector Mobile/Car Radio Antenna Equipped with BNC to SO-239 Adapter by LUITON #adLUITON #ad
- 1. Equipped with bnc to so-239 adapter, connector for handheld cb radio to compatible with antenna when you in the car. 3. 13ft rg-58/u cable let you can put the antenna to the best position with good signal.
2. Cb antenna 14 inch with pl-259 connector, magnet base and 13ft RG-58/U cable. 4. Easy to install on the roof or trunk of any vehicle and enjoy quality signal reception. 5. Warranty would be valid for 12 months against manufacturing defect.