As an Amazon Associate I earn from qualifying purchases.
FiiO #ad - Accessories: ● usb-a / usb type-c charging cable / ● usb-type-c / ● t5 torx screwdriver / usb-type-c cable / ● coaxial digital patch cable / lightning Cable / ● rubber band l x 2 / ● 3.5 mm line cable / ● non-slip pad / ● optical digital conversion adapter / ● Rubber Band S x 2 / ● USB-Type-C / ● Cloth Carrying Pouch.
Corresponding sampling frequency / aptx adaptive / ◆ supported dsd formats: ● dsd64 2. 8 mhz / ● dsd128 5. 6 mhz / bit rate: 768 khz / aptx hd / aptx LL / sbc / ● DSD256 11.2
Output: ● 220 mw or more 3. 5 mm single-ended output / optical digital / ◆ thd + n: less than 0002 % at 1 khz / 32 Ω load / 32 Ω load / 32 Ω load / ● 560 mw or more balanced output / line output combined / ◆ output Impedance: 1 Ω / ◆ SN Ratio: 117 dB or More A-Weighted / ◆ input method usb type c / coaxial digital / ● 3.5 mm headphone / ◆ headphone Output Terminal: ● 4. 4 mm balance / Line Input.
FiiO #ad - With thx’s patented feed-forward error correction topology, high power and a pure, the AAA amps have low distortion, uncolored sound. No driver is needed for use with a Mac computer, while Windows will require a driver easily available from FiiO's website.
The q3 is equipped with 4. 4mm/2. 5mm balanced and 3. 5mm single-ended outputs, usb in;19mw 300Ω, thd+n＜1%, usb in. Balanced headphone output specifications 2. 5mm/4. 4mm headphone output port:180mw 16Ω, thd+n＜1%, thd+n＜1%, USB IN;300mW 32Ω, allowing you to connect all kinds of headphones.
Usb type-c input interface. Usb-if usb c compatibility certified: meets standard transmission interface specifications to ensure the compatibility of its USB solution. It can decode audio formats up to 384 kHz / 32-bit PCM. Utilizing akm’s new efficient ak4462 velvet sound dac and xmos xuf208 usb chip allowing it to easily support decoding up to 768kHz/32bit PCM and DSD512, the Q3 achieves excellent performance. Multiple interfaces headphone jacks.
FiiO #ad - A wealth of accessories for a premium experience: Lightning-Micro USB cable, optical adapter, carrying pouch, 3.5mm audio cable, coaxial adapter, etc. Unique rgb status lights with different colors to help quickly identify the input modes and working status.
Interchangeable amp modules, fully compatible with any FiiO amp modules; The default AM3A module supports both single-ended and Balanced outputs.
FiiO #ad - Fpga precision clock management+oLED Displaying+9 hours battery life+2 microphones with cVC 8. 0 noise cancellation. Csr8675 bluetooth 5. 0 receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers.
Can be remotely controlled via fiiO Music app to swtich channel balance, 8 different DAC lowpass filter and 10-band EQ.
FiiO #ad - Get the mid and high:the fh3 headphones which is two knowles drivers paired with a beryllium-plated dynamic driver, placed near the opening of the sound tube, controlled by a physical + electronic frequency crossover system masterfully cover the entire frequency response range. High-purity monocrystalline silver-plated copper cable:the included high-purity monocrystalline silver-plated copper cable, was carefully chosen for its fidelity and ability to resolve details, being noticeably better than the typical earphone cable.
Comfort for your ears & 3rd gen industrial design:to make a circle of comfort for your ears, fh3 earbuds is made of a aerospace-grade aluminum-magnesium alloy shell.
S. Turbo acoustic design & balanced pressure relief technology:the longer and smoother turbine-inspired sound tubes effectively filter unwanted high frequencies, carefully designed so as to ensure that the air pressure in the front and rear chambers is balanced, giving one deeper and harder-hitting bass after it is combined with FiiO’s patented S. Turbo acoustic design. Mid-frequencies: the ed-30262 gives sweeter and fuller vocals as well as a wider soundstage. And the fh3 earphones utilizes FiiO’s patented balanced pressure relief technology, thus making for stress-free listening.
FiiO #ad - Audio quality: being equipped with the xmos platform allows the q1 mark ii to support decoding of more formats with outstanding performance – it is capable of decoding up to 384 kHz /32 bit PCM as well as up to DSD256 the latter is indicated by a green light.
Technology: the q1 mark ii employs a clever adc volume adjustment mechanism – by accurately reconstructing the ADC curve, problems such as volume imbalance between the left and right channels and noise when adjusting the volume are all avoided while also greatly enhancing volume adjustment accuracy with each turn of the knob.
Change the amount of gain depending on how sensitive your headphones are, and tailor the bass level to your liking depending on the music you listen to. Volume knob: the volume knob employs a unique obconical design, which allows us to maximize the knob's diameter to make it easier to rotate while still fitting it into a limited spac.
FiiO #ad - Produces better sound quality - fiio improved the thx aaa power amplifier circuit in the Q3 Amp/DAC for lower distortion and higher power compared to the Q1 MKII. Blucoil usb wall adapter 5V 1000mA Model No. You can also connect this DAC on PC and mobile phones.
Includes - fiio q3 thx balanced amplifier & dac for windows, digital cameras, mac, ios, tablets, and android mobile phones; usb-c cables; 3.5mm line cord; binding Straps; Non-Slip Mat; Storage Bag. The q3 offers pure, uncolored sound.
Provides more connections - plug all kinds of headphones in q3's 4. 4mm/2. 5mm balanced and 3. 5mm single-ended jacks. It supports up to 32bit/768kHz PCM and DSD512 decoding. Q3 is compatible with Windows, Mac, iPad, iPhone, and Android smartphones. Delivers pure sound all day - enjoy listening to hi-res music for up to +10 hours with Q3! The AMP/DAC is equipped with a 1800mAH battery, all-aluminum, and copper-nickel interference shield. Ka25-0501000us.
FiiO #ad - New type-c connector with usB DAC functionality+11 hour of continuous pleasure at a full charge. Can be remotely controlled via fiiO Music app to switch channel balance, 8 different DAC lowpass filter and 10-band EQ.
Bluetooth indicator light +call up siri in ios+In-line Controlin headphones with CTIA controls, volume, you can use the microphone as well as the play/pause, and track selection controls.
FiiO #ad - Built-in qualcomm qc3005 bluetooth chip, with support for Bluetooth 5. 0 and sbc/aac/aptx/aptX LL audio codecs. Specifically designed to make your ATH-M50x series go wireless.
1. FiiO
#adFiiO USB DAC Portable Headphone Amplifier Q5s Type-CJapan Domestic Genuine ProductsShips from Japan
#adCorresponding sampling frequency / aptx adaptive / ◆ supported dsd formats: ● dsd64 2. 8 mhz / ● dsd128 5. 6 mhz / bit rate: 768 khz / aptx hd / aptx LL / sbc / ● DSD256 11.2
More information #ad
2 mhz / aptx / ◆ compatible bluetooth codec: AAC / 32 bit Max / LDAC. Built-in battery capacity: 3800 mah / ◆ body size: about d 124 mm x w 64 mm x H 16 mm / ◆ continuous use time: about 9 hours or more / ◆ Body Weight: about 198 g. Output: ● 220 mw or more 3. 5 mm single-ended output / optical digital / ◆ thd + n: less than 0002 % at 1 khz / 32 Ω load / 32 Ω load / 32 Ω load / ● 560 mw or more balanced output / line output combined / ◆ output Impedance: 1 Ω / ◆ SN Ratio: 117 dB or More A-Weighted / ◆ input method usb type c / coaxial digital / ● 3.5 mm headphone / ◆ headphone Output Terminal: ● 4. 4 mm balance / Line Input.
| Brand | FiiO #ad |
| Manufacturer | FiiO #ad |
| Part Number | FIO-Q5S-C |
| Model | FIO-Q5S-C |
More information #ad
2. FiiO
#adFiiO Q3 Headphone Amplifier DSD512 | 768K/32Bit AK4462DAC with THX AAA amp Technology for MobilePhone &PC with 2.5/3.5/4.4mm Output
#adThe q3 is equipped with 4. 4mm/2. 5mm balanced and 3. 5mm single-ended outputs, usb in;19mw 300Ω, thd+n＜1%, usb in. Balanced headphone output specifications 2. 5mm/4. 4mm headphone output port:180mw 16Ω, thd+n＜1%, thd+n＜1%, USB IN;300mW 32Ω, allowing you to connect all kinds of headphones.
More information #ad
Headphone output specifications 3. 5mm headphone output port:150mw 16Ω, usb in;35mw 300Ω, thd+n＜1%, usb in;160mw 32Ω, thd+n＜1%, THD+N＜1%, USB IN. Usb type-c input interface. Usb-if usb c compatibility certified: meets standard transmission interface specifications to ensure the compatibility of its USB solution. It can decode audio formats up to 384 kHz / 32-bit PCM. Utilizing akm’s new efficient ak4462 velvet sound dac and xmos xuf208 usb chip allowing it to easily support decoding up to 768kHz/32bit PCM and DSD512, the Q3 achieves excellent performance. Multiple interfaces headphone jacks.
| Brand | FiiO #ad |
| Manufacturer | FiiO #ad |
| Height | 0.51 Inches |
| Length | 4.29 Inches |
| Weight | 0.24 Pounds |
| Width | 2.32 Inches |
| Part Number | Q3 |
| Model | Q3 |
More information #ad
3. FiiO
#adFiiO Q5 Bluetooth aptX and DSD-Capable DAC Amplifier for PC/MobilePhone with Coaxial/Optical/USB/Line/Bluetooth Input
#adInterchangeable amp modules, fully compatible with any FiiO amp modules; The default AM3A module supports both single-ended and Balanced outputs.
More information #ad
Dual ak4490en dac chips for the ultimate in decoding performance, supporting up to 384kHz/32bit and native DSD 256; Audiophile-grade components designed for a wonderful, melodious sound that is just pure ecstasy for your ears. Hi-res audio and aptx certified, pc, supporting decoding for MobilePhones, WM-PORT Sony Walman players and many other players with digital audio output.| Brand | FiiO #ad |
| Manufacturer | FiiO #ad |
| Height | 0.63 Inches |
| Length | 4.88 Inches |
| Weight | 0.42 Pounds |
| Width | 2.52 Inches |
| Part Number | FiiO Q5 |
| Model | Q5 |
More information #ad
4. FiiO
#adAptX HD, Black, AAC 3.5mm Unbalanced&2.5mm Balanced Output, aptX, FiiO BTR5-384K/32Bit Native DSD256 Hi-Res CSR8675 Bluetooth5.0 Receiver/USB DAC/DSD Headphone Amp with LDAC
#adCan be remotely controlled via fiiO Music app to swtich channel balance, 8 different DAC lowpass filter and 10-band EQ.
More information #ad
Including hi-fi dacses9218p*2 for extremely detailed reproduction of sound and Independent control chip Xmos XUF208 for the ultimate in decoding performance, supporting up to 384kHz and native DSD. For greater power and detail resolution, the BTR5 features both balanced 2. 5mm and single-ended 3. 5mm outpts.| Brand | FiiO #ad |
| Manufacturer | FiiO #ad |
| Height | 2.28 Inches |
| Length | 0.98 Inches |
| Weight | 0.1 Pounds |
| Width | 0.39 Inches |
| Part Number | BTR5 |
| Model | BTR5 |
More information #ad
5. FiiO
#adHigh Fidelity for Smartphones/PC/Tablet, FiiO FH3 Triple Drive1 Dynamic + 2 Knowles BA in-Ear HiFi Earphones with High Resolution,Bass Sound
#adComfort for your ears & 3rd gen industrial design:to make a circle of comfort for your ears, fh3 earbuds is made of a aerospace-grade aluminum-magnesium alloy shell.
More information #ad
Get the bass:the 10mm beryllium-plated diaphragm dynamic driver in the FH3 earphones was specifically chosen for its superior acoustic properties. High-frequencies: the knowles RAD-33518 driver provides extremely clear sound with well-extended yet smooth treble. S. Turbo acoustic design & balanced pressure relief technology:the longer and smoother turbine-inspired sound tubes effectively filter unwanted high frequencies, carefully designed so as to ensure that the air pressure in the front and rear chambers is balanced, giving one deeper and harder-hitting bass after it is combined with FiiO’s patented S. Turbo acoustic design. Mid-frequencies: the ed-30262 gives sweeter and fuller vocals as well as a wider soundstage. And the fh3 earphones utilizes FiiO’s patented balanced pressure relief technology, thus making for stress-free listening.
| Brand | FiiO #ad |
| Manufacturer | FiiO #ad |
| Height | 0.79 Inches |
| Length | 4.72 Inches |
| Weight | 0.02 Pounds |
| Width | 0.79 Inches |
| Part Number | FH3 |
| Model | 8592 |
More information #ad
6. FiiO
#adFiiO Q1 Mark II Native DSD DAC & Amplifier for PC/MobilePhone
#adTechnology: the q1 mark ii employs a clever adc volume adjustment mechanism – by accurately reconstructing the ADC curve, problems such as volume imbalance between the left and right channels and noise when adjusting the volume are all avoided while also greatly enhancing volume adjustment accuracy with each turn of the knob.
More information #ad
Switches: the q1 mark ii features a switch for adjusting gain as well as another switch to fine-tune bass levels. Design: the fully metal exterior is not only aesthetically pleasing, but also effectively protects the Q1 Mark II's innards from electromagnetic experience, ensuring sound quality is not compromised when it is used together with an iPhone. Change the amount of gain depending on how sensitive your headphones are, and tailor the bass level to your liking depending on the music you listen to. Volume knob: the volume knob employs a unique obconical design, which allows us to maximize the knob's diameter to make it easier to rotate while still fitting it into a limited spac.
| Brand | FiiO #ad |
| Manufacturer | FiiO #ad |
| Height | 2.32 Inches |
| Length | 3.9 Inches |
| Weight | 0.22 Pounds |
| Width | 0.47 Inches |
| Part Number | FiiO-Q1II |
| Model | Q1 Mark II |
More information #ad
7. FiiO
#adFiiO Q3 THX Balanced Amplifier & DAC for Windows, Mac, iOS, and USB Wall Adapter, and Android Mobile Phones Bundle with Blucoil 5000mAh Portable Power Bank
#adIncludes - fiio q3 thx balanced amplifier & dac for windows, digital cameras, mac, ios, tablets, and android mobile phones; usb-c cables; 3.5mm line cord; binding Straps; Non-Slip Mat; Storage Bag. The q3 offers pure, uncolored sound.
More information #ad
You won't find any interference when using the Q3 right next to your smartphone. Offers powerful decoding - q3 utilizes ak4462 velvet sound dac and xmos xuf208 usb chip to achieve excellent hi-res performance. Provides more connections - plug all kinds of headphones in q3's 4. 4mm/2. 5mm balanced and 3. 5mm single-ended jacks. It supports up to 32bit/768kHz PCM and DSD512 decoding. Q3 is compatible with Windows, Mac, iPad, iPhone, and Android smartphones. Delivers pure sound all day - enjoy listening to hi-res music for up to +10 hours with Q3! The AMP/DAC is equipped with a 1800mAH battery, all-aluminum, and copper-nickel interference shield. Ka25-0501000us.
| Brand | FiiO #ad |
| Manufacturer | FiiO #ad |
| Height | 0.49 Inches |
| Length | 4.13 Inches |
| Weight | 1 Pounds |
| Width | 2.32 Inches |
| Part Number | A2155 |
More information #ad
8. FiiO
#adFor Home TV,Speaker,Car Stereo,Type C Port 3.5mm Unbalanced & 2.5mm Balanced Output, FiiO BTR3K Hi-Res Bluetooth 5.0 Receiver/Headphone Amp with Dual AK4377A DAC |aptX HD/aptX LL/LDAC Support
#adBluetooth indicator light +call up siri in ios+In-line Controlin headphones with CTIA controls, volume, you can use the microphone as well as the play/pause, and track selection controls.
More information #ad
Csr8675 bluetooth 5. 0 receiver designed to deliver studio-quality sound through your ears WIRELESS - using your existing wired headphones, earphones or even speakers. For greater power independent dual ak4377a daC and detail resolution, the BTR3K features both balanced 2. 5mm and single-ended 3. 5mm outpts.| Brand | FiiO #ad |
| Manufacturer | FiiO #ad |
| Height | 0.43 Inches |
| Length | 2.28 Inches |
| Weight | 0.05 Pounds |
| Width | 0.98 Inches |
| Part Number | FIIO-BTR3K |
| Model | BTR3K |
More information #ad
9. FiiO
#adFiiO BTA10 Bluetooth Adapter and Amplifier Compatible with ATH-M50X with aptX/AAC Support
#adMore information #ad
The built-in lithium ion battery allows for 8 hours of comfortable listening. Audiophile-grade high performance amplifier TPA6132A2 for outstanding sound quality. Built-in microphone backed by Qualcomm cVc noise cancellation technology.| Brand | FiiO #ad |
| Manufacturer | FiiO #ad |
| Height | 1.97 Inches |
| Length | 3.35 Inches |
| Weight | 0.04 Pounds |
| Width | 0.79 Inches |
| Part Number | FIIO-BTA10 |
| Model | BTA10 |
More information #ad
